Cold Room Panel
XPS Panel is a material that is continuously extruded and foamed by a special process. The hard film formed on the surface is even and flat, and the internal closed cell foam is continuous and uniform, forming a honeycomb structure, so it has high compression resistance, light weight, no Water absorbing, non-breathable, wear-resistant and non-degradable.
1.Widely used for wall insulation, flat concrete roof and steel structure roof insulation;
2.It is used for moisture-proof thermal insulation in low-temperature storage ground, parking platform, airport runway, expressway and other fields. The extruded board is a polystyrene resin supplemented with a polymer, which is injected with a catalyst while being heated and mixed, and then extruded and extruded a continuous closed-cell foamed rigid foam board, the inside of which is an independent closed bubble structure. An environmentally friendly insulation material with excellent properties such as high pressure resistance, low water absorption, moisture resistance, air permeability, light weight, corrosion resistance, super aging resistance (almost no aging for long-term use), and low thermal conductivity. Extruded plastic board is widely used in dry wall insulation, flat concrete roof and steel structure roof insulation, low temperature storage ground, low temperature floor auxiliary heating under the heating pipe, parking platform, airport runway, highway and other fields of moisture insulation, control The ground frost heave is a heat insulation and moisture-proof material with good quality, low price and good quality in the construction industry.
XPS Panel is a material that is continuously extruded and foamed by a special process. The hard film formed on the surface is even and flat, and the internal closed cell foam is continuous and uniform, forming a honeycomb structure, so it has high compression resistance, light weight, no Water absorbing, non-breathable, wear-resistant and non-degradable.
| Specification | ||
| Width | Standard width 950mm for wall, 970mm for roof | |
| Length | As customers' requirements, maximum 12000mm. | |
| Thickness | 50 mm | |
| 75 mm | ||
| 100 mm | ||
| 150 mm | ||
| 200 mm | ||
| 250 mm | ||
| The most suitable thickness will be suggested according to the size and temperature requirements, or customers' requirements. | ||
| Core material | XPS (Expanded Polystyrene) | |
| Density | 10~24 kg/m3 | |
| Joint system | Z lock/slip joint/tongue & groove | |
The structure of the panel is a polyurethane sandwich panel made with traditional molds,which is embedded the eccentric hook in the mould around the sandwich panel when produce,convenient assembly,and generally applicable to small or medium-sized cold storage.
Taking polyurethane with excellent insulation performance as core material and colored steel sheet,304 stainless steel or aluminum sheet as external material, the sandwich-type board can reduce the heat conduction due to difference between internal and external temperature to achieve maximum efficiency of freezing and refrigeration system
We are factory which is established in 1993 with more than 30 years industry experience
